The basic structure of an electromagnetic overhead crane is the same as that of a hook overhead crane, with the difference that a DC electromagnetic lifting chuck is suspended on the hook, which is used to lift magnetically conductive ferrous metals and products made from them. The AC power is co

The crane trolley has four drives, 4 sets of balancing trolleys, the large trolley drives eight drives, 16 sets of balancing trolleys, A3 working level, drive with full vehicle frequency conversion, built-in three-in-one drive. European crane technology is combined with domestic crane technology,

The difference between a double trolley overhead crane and a hook overhead crane is that there are two trolleys located on the main beam. Twin trolleys can be lifted or operated separately. When long objects need to be lifted, a switch on the console is used. , realize synchronous lifting and syn

This crane is the largest explosion-proof crane equipment in China and is used in the aerospace industry. It consists of two explosion-proof lifting trolleys with a lifting capacity of 160 tons, a reinforced bridge frame and a three-in-one transport drive. The double trolleys can be raised and lo

This crane uses hanging beams to lift long steel workpieces, sheets, bars, coils and other items. It is equipped with electromagnetic suction cups or clamps or special group hooks for lifting. It is mainly composed of a box bridge, a hoisting trolley, a trolley driving mechanism and a driver. It

This product has a double girder and double girder structure, and is currently the largest double girder single car casting crane in China. The bridge is composed of two main girders and two hinged end girders. The overall layout is compact and reasonable. All gearboxes use hard surface tooth ada

Used to transport long pieces of ferrous metals such as slabs and rods. The rotation is achieved in two forms. One way is the rotation of the hanging beam, that is, the hanging beam has a double-layer structure. The upper hanging beam is wound by a pulley group and steel cable. The lower hanging

This product adopts a four-beam, four-rail, two-car structure. The main structure has good strength and rigidity under vertical and horizontal loads. The trolley wheels adopt 20-wheel design, simple mechanical model and balanced wheel pressure distribution, which can effectively reduce the cost o

The electric hoist overhead crane is composed of four parts: bridge box frame, trolley drive mechanism, trolley and electrical equipment. A stationary electric hoist is installed on the trolley frame as a lifting mechanism. LD Type Transmission The operation of the trolley is divided into two typ

The single-beam electric crane consists of a main beam welded with steel plates and I-beams, an end beam, an electric hoist and a running mechanism. The electric hoist runs along the lower flange of the I-beam of the main beam. beam for lifting objects. Features lightweight structure, easy instal

The electric single girder overhead crane is composed of main beam, end beam, electric hoist and electric sports car, welded by steel plates and I-beams. It is suspended on the I-beam at the top of the factory building. The length of the console is from 0.5 to 1 m. The electric winch is located a

This product is composed of a box-shaped main beam, an end beam, a trolley and a running gear. An electric hoist is installed on the corner trolley as a lifting mechanism. The corner trolley is positioned to run on one side of the main beam. The trolley is equipped with an upper and lower horizon